Waste Tank Warning Light; Emergency Stop Button; Breakaway Floor-Tool Feature; Schmutzwassertankwarnleuchte - Numatic TTV-5565 Mode D'emploi

Masquer les pouces Voir aussi pour TTV-5565:
Table des Matières

Publicité

Waste-water tank fill level warning light
Emergency-stop button
Breakaway floor-tool
22
When the waste water-tank becomes full, a red warning light will
illuminate on the operator control panel (Fig. 40).
The vacuum motor will stop automatically after 5 seconds .
The waste-water tank requires emptying (see page 28).
Fig.40
The TTV - 5565 is equipped with an electronic braking system.
Simply release the hand operated start / stop trigger and the machine will stop.
In an emergency, strike the emergency-stop button.
The machine will be disabled.
To reset, turn Emergency Stop button clockwise (see fig.41).
After re-setting the emergency stop button, to restart the machine, turn the
master control on/off key to the 'OFF' and then 'ON' position.
Fig.41
Fig.42
Fig.43
244033 05/14 (A11)
The floor-tool design incorporates a breakaway feature.
Allowing it to safely disengage from its mounting should it
become caught on an obstruction, during forward machine
movement.
(See fig.42)
To re-attach the blade to its holder.
First loosen the retaining knobs on the floor-tool body and slide
onto the holding bracket.
Tighten retaining knobs to finger tight.
(See fig.43)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ttv-200t

Table des Matières