Break-Away Floor-Tool Feature; Setting The Cleaning Controls - Numatic HT4045 Notice Originale

23
Care must be taken to reduce speed when cornering or when manoeuvring around obstacles.
Ensure your TT machine has been plugged into a suitable power supply.
Select the desired function using the On / Off switches fitted to the handle.
To start: hold down either trigger and
press the yellow On / Off Switch once
1

Setting the cleaning controls

Breakaway floor-tool
The floor-tool design incorporates a safety knock-off feature.
Allowing it to safely disengage from its mounting should it
become caught on an obstruction, during forward machine
movement.
To re-attach the floor-tool blade to its holder, first loosen the retaining
knobs on the floor-tool body and slide onto the holding bracket.
Tighten retaining knobs to finger tight (See Fig.23).
Note:
2
1
T 01460 68600
15