Lowering The Floor-Tool; Adjusting The Seat; Setting The Cleaning Controls - Numatic Nacecare TTB 3226 Mode D'emploi

Lower the floor-tool by moving the release lever to the upper position (Fig.23).
Sitting in the driving position, adjust the seat forwards or backwards as necessary by using the lever
found on the left-hand side (see Fig.24).
Note: The seat is fitted with a pressure sensor that disables the machine until an operator is seated.
Fig.24
Insert the key into the ignition and quarter-turn it clockwise to the 'ON' position (1).
The battery charge-level indicator will illuminate.

Lowering the Floor-tool

Fig.23

Setting the cleaning controls

13

Adjusting the seat