Anspach G1 Mode D'emploi page 21

The suggested operation conditions are to be considered
as a starting point for determination of the overall process
capability, without regard for type or condition of equipment
used or methods, techniques or practices employed by
user. Use of proper sterilization indicator devices is strongly
recommended. It is recommended that a drying cycle
be included to avoid possible adverse effects caused by
exposure to condensation.
• Packaged and sterilized products should be stored in a dry,
clean environment, protected from direct sunlight, pests, and
extremes of temperature and humidity. Use products in the
order in which they are received ("first-in, first-out principle").
Warning: All Instrument System components returned for servicing
or repair should be properly cleaned and sterilized as applicable
prior to shipping.
Warning: Transmissible Spongiform Encephalopathies
(TSE)
DePuy Synthes Power Tools will not authorize or accept the return
of products that directly contact patients or are contaminated
with a patient's body fluids who is suspected or confirmed with a
Transmissible Spongiform Encephalopathies/ Creutzfeldt-Jakob
Disease (TSE/CJD) diagnosis. DePuy Synthes Power Tools
recommends that all Anspach products used on a patient confirmed
with a TSE/CJD diagnosis be incinerated. Anspach dissection
tools used on a patient suspected of TSE/CJD diagnosis must be
incinerated.
Contact your Sales Representative for replacement of product
incinerated under this policy or for temporary equipment while
original equipment is quarantined. Contact the DePuy Synthes
Power Tools Customer Service Department regarding TSE/CJD
contamination for additional information.
17