Safety Regulations - Corghi PW IW 6 Manuel D'utilisation

CAUTION
Failure to comply with the instructions and danger warnings can cause serious injuries
to the operator or other persons.
Do not operate the machine until you have read and understood all the danger/warn-
ing notices in this manual.
This machine must be used only by qualified and authorised personnel. A qualified op-
erator has read and understood the manufacturer's instructions, is suitably trained, and
is conversant with safety and adjustment procedures to be adhered to during operations.
Operators are expressly forbidden from using the machine under the influence of alcohol
or drugs capable of affecting physical and mental capacity.
The following conditions are essential:
- read and understand the information and instructions described in this manual;
- have a thorough knowledge of the features and characteristics of the machine;
- keep unauthorised persons well clear of the working area;
- make sure that the machine has been installed in compliance with all relevant standards
and regulations in force;
- make sure that all machine operators are suitably trained, that they are capable of us-
ing the machine correctly and safely and that they are adequately supervised during
work;
- do not touch power lines or the inside of electric motors or any other electrical equip-
ment before making sure that they have been powered off;
- read this booklet carefully and learn how to use the machine correctly and safely;
- always keep this user manual in a place where it can be readily consulted and do not
fail to refer to it.
CAUTION
Do not remove or deface the DANGER, WARNING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If one or more decals have been detached or
damaged, replacements can be obtained from your nearest CORGHI dealer.
- Observe the unified industrial accident prevention regulations relating to high voltages
and rotating machinery whenever the machine is in use or being serviced.
- Any unauthorised alterations made to the machine automatically release the manufacturer
from any liability in the case of damage or accidents attributable to such alterations.
Specifically, tampering with or removal of the machine safety devices is a breach of the
regulations relating to Safety at Work.
CAUTION
During work and maintenance operations, always tie back long hair and do not wear
loose clothing, ties, necklaces, wristwatches or any other items that may get caught
up in the moving parts.
28

SaFETY rEGULaTIoNS

User manual PW IW 6" 8" 10"