Burkert 8630 Instructions De Service page 124

Selection of additional functions within the main menu
Select the sub menu
By pressing the MANUAL/AUTOMATIC key, enter within the additional sub-menu.
Select the required function with the arrow-keys.
By pressing the MANUAL/AUTOMATIC key, validate the additional function within the main menu. The function is marked with
a star (*).
All functions are activated within the main menu after validation through
Enter the parameters of the additional functions within the main menu.
Withdrawal of additional functions from the main menu
Select the sub menu
By pressing the MANUAL/AUTOMATIC key, enter within the additional sub-menu.
Select a function marked with a star (*) by mean of the arrow-keys.
By pressing the MANUAL/AUTOMATIC key, withdraw the additional function from the main menu (the marking star (*) is
removed).
The function is deactivated from the main menu after validation through
Entry of numeric values
Enter the numeric values in the previous functions by pressing one or several times the arrow up key (to increase the value) or
the arrow down key (to decrease the value). If the value is displayed with 4 digits, only the blinking one can be changed with the
arrow key. Pressing the MANUAL/AUTOMATIC key moves to the next position.
Selection of
the
ADDFUNCT
sub-menu
Extended
main menu
Fig. 6.6: Principle of the selection of an additional function to the main menu
Top Control Continuous
within the main menu.
within the main menu.
Main menu
Validation of the
A C T F U N C
selected function
I N P U T
A D D F U N C T
X . T U N E
E N D
Return to the exten-
ded main menu
Validation of the selected additional
A C T F U N C
functions and adding to the main
I N P U T
menu
C H A R A C T
X . C O N T R L
P. C O N T R L
A D D F U N C T
X . T U N E
P . Q ' L I N
E N D
.
.
Additional menu
* C H A R A C T
C U T O F F
D I R E C T N
S P L T R N G
X . L I M I T
* X . C O N T R L
* P. C O N T R L
E N D F U N C T
123