System Configuration - Burkert 8630 Instructions De Service

2

SYSTEM CONFIGURATION

NOTE The following picture illustrates a complete system, based on
• a control valve with a pneumatic actuator
• a Top Control Continuous
These elements linked together compose a functional unit.
The function ranges of the Bürkert pneumatic control valves are greatly increased when in combination with the Top Control
Continuous. These valves can be fitted with the Top Control Continuous in order to obtain continuous control with variable
functions.
The figure 2.1 below shows various combination capabilities of the Top Control Continuous combined with various pneumatic
control valves. A vast range of connections and valve diameters is available, although not displayed in the figure below. All
technical informations about these products are described in the relevant data sheets. The product range will be continuously
increased.
Top Control
Type 8630
with flat seat valve Type 2712
(here with flange connection)
Top Control
Type 8630
Fig. 2.1: Overview of mounting options for the Top Control Continuous with various valve types
Top Control Continuous
with slanted seat
valve Type 2700
with ball valve Type 2655
with diaphragm valve
Type 2730
with swing valve Type 2672
89