Safety Devices - John Bean EHP System II-E Manuel D'utilisation

BEFORE PERFORMING ANY MAINTENANCE OR
REPAIRS THE MACHINE MUST BE DISCONNECTED
FROM THE AIR AND ELECTRICAL SUPPLY.
NEVER WEAR TIES, CHAINS OR OTHER LOOSE
ARTICLES WHEN USING, MAINTAINING OR
REPAIRING THE MACHINE. LONG HAIR IS ALSO
DANGEROUS AND SHOULD BE KEPT UNDER A HAT.
THE USER MUST WEAR PROPER SAFETY ATTIRE
I.E.: GLOVES, SAFETY SHOES AND GLASSES.
MAINTAIN ALL ELECTRIC CABLES IN GOOD REPAIR.
KEEP WORKING AREA TIDY. CLUTTERED AREAS
INVITE ACCIDENTS.
AVOID DANGEROUS ENVIRONMENTS. DON'T USE
PNEUMATIC OR ELECTRICAL EQUIPMENT IN DAMP
OR WET LOCATIONS, OR EXPOSE THEM TO RAIN.
KEEP THE WORK AREA WELL LIGHTED.
A L L E L E C T R I C A L C O N N E C T I O N S M U S T B E
PERFORMED BY A LICENSED TECHNICIAN.
ALL SERVICE MUST BE PERFORMED BY AN
AUTHORIZED SERVICE TECHNICIAN.

SAFETY DEVICES

This machine has several protectors made of plastic to
prevent compression or crushing hazards.
There is an infl ation pressure limiting device to prevent
explosion hazard due to tIre overinfl ation.
KEEP SAFETY DEVICES IN PLACE AND IN WORKING
ORDER.
9
EN -