Glass Cleaning - Rizzoli L Série Manuel D'utilisation

5.8 OVEN CLEANING
Before cleaning it is recommended to remove both
the baking pan and the grill. For an accurate clean-
ing, it is possible to remove also the lateral grills.
5.9 CHIMNEY CLEANING
The cleaning of the chimney must be done by ex-
perienced technicians at least every six months of
normal use of the cooker. Anyway, cleaning must
be done every time it becomes necessary accord-
ing to the use or to the combustible used. We rec-
ommend to follow strictly all the local laws dealing
about chimney cleaning. All the parts of the chim-
WARNING! If the chimney cleaning is not made as recommended, fire in the flue could
happen.
5.10

GLASS CLEANING

The glasses of the fire door and the combustion
chamber can be cleaned with normal specific
products you can find in commerce. The internal
part of the combustion chamber door is designed
to clean itself during the use of the cooker. Any-
WARNING! Do not clean the glass before waiting for its cooling. Suddenly changes in
temperature may cause breakings in the glass.
5.11 WOODBOX EXTRACTION
The woodbox is endowed with a sliding rails
system that allows an easy closure. It would be
enough to juxtapose the box to close it automat-
ically. For cleaning or other reasons it could be
necessary to remove the woodbox. To do this, it is
WARNING! Do not put inflammable products in the woodbox! The objects placed inside
must not reach the upper wall of the woodbox.
5.12 PLATE CLEANING AND MAINTENANCE
Radiating plates in special steel need regular main-
tenance, in particular they need cleaning after
every use that brings moisture or dust on the plate
itself.
With cold cooker or thermal cooker you have to
remove all the pots and boilers that could maintain
The oven must be cleaned with products available
in the commerce.
ney must be cleaned. Together with the cleaning
of the chimney, make also the internal cleaning of
the cooker or thermal cooker, removing the plate
and cleaning the upper part of the oven and the
fume-circuits. After the cleaning of the chimney,
be sure to have closed all the inspections doors in
order to avoid draught problems.
way, sometimes you could have the need to clean
also the internal part. To do this, it is necessary to
remove the internal glass unscrewing the four Al-
len screws that block it.
necessary to extract the woodbox to limit switch,
then lift it slightly and at the same time extract it
again. To reinsert the woodbox repeat the opera-
tions in the opposite sense.
moisture on the plate.
Together with the device are given some exclusive
products, studied for the cleaning and the mainte-
nance of the plate: the abrasive sponge, the plate
cleaner and the oil for plate care. On how to use
them please read the instructions written on the
100