Glass Cleaning; Extraordinary Maintenance - Rizzoli T Série Manuel D'utilisation

pieces eventually falling during the cleaning of the
chimney hood, in order to prevent damages inside
the thermostove (see picture 31). This device is
useful in case of straight chimneys without ash
collection points.
Together with the cleaning of the chimney, make
also the internal cleaning of the stove, cleaning the
fume-circuits. After the cleaning of the chimney,
be sure to have closed all the inspections doors in
order to avoid draught problems.
WARNING! If the chimney cleaning is not made as recommended, fire in the flue could
happen.
5.10

GLASS CLEANING

The glass of the fire door might be dirtied by soot.
In case of bad combustion, bad draught or in pres-
ence of low quality wood, the glass could become
more dirty.
The glass doors of the fire door and, in the T Chef
Series models, the oven door can be cleaned with
the normal specific products available on the mar-
WARNING! Do not clean the panoramic door before waiting for its cooling. Sudden
changes in temperature may cause breakings in the glass.
5.11 THERMIC DILATATION
During the use all the materials of the thermostove
are subjected to dilatation and light movings due
to the temperature variations. This phenomenon
must not be prevented otherwise deformations
5.12

EXTRAORDINARY MAINTENANCE

Most parts of the thermostove are easy to re-
move with a simple screwdriver, eventual repairs
or modifies will be faster if the concerned piece,
directly or by a dealer is sent to our factory. If you
need accessories or spare parts, please tell us the
serial number of the thermostove indicated in the
green booklet given together with the stove.
Picture 31 – Tar blocking device (T Basic Series)
ket. The internal part of the combustion chamber
door has been designed to clean itself during the
use of the thermo-stove. Nevertheless, from time
to time it may be necessary to clean the glass in
contact with the combustion flame.
It is recommended to use a soft rag wet, drying ac-
curately after the operation is done.
and breakings may occur. For this reason, the
spaces that allow the dilatation both internal and
external of the thermostove must be kept free and
clean.
The serial number is indicated also on the rear part
of the thermostove.
96