Rizzoli L Série Manuel D'utilisation page 79

2.3 SIDES FIXING
The device is delivered with both sides unfixed,
inserted in a separated package. Before the final
placement of the device, it is necessary to fix the
covering of the sides.
To do this, the 16 screws already on the device (8
x8
x8
Picture 2 – Position of the screws on the device to fix the covering of the sides
x2
x2
Picture 3 – Fixing of the sides covering elements
in front and 8 in the rear part) must be removed,
then place the covering fixing it with the screws in
the original position. On each side, the lower part
must be fixed before the upper one.
77
x8
x8
x2
x2