Glass Cleaning; Extraordinary Maintenance - Rizzoli X Basic Manuel D'utilisation

4.9

GLASS CLEANING

The glass of the fire door might be dirtied by soot.
In case of bad combustion, bad draught or in pres-
ence of low quality wood, the glass could become
more dirty. To limit this issue, it is suggested to
make regular combustion cycles with vivid flame.
WARNING! Do not clean the panoramic door before waiting for its cooling. Suddenly
changes in temperature may cause breakings in the glass.
4.10 MAINTENANCE FIRE DOOR WITH ASSISTED CLOSURE
The fire door of X Range stoves is endowed with
a spring for the automatic closure. The strength
of closure of the spring is influenced by the incli-
nation of the stove. If the strength of the spring
4.11 THERMIC DILATATION
During the use all the materials of the stove are
subjected to dilatation and light movings due to
the temperature variations. This phenomenon
must not be prevented otherwise deformations
4.12 EXTRAORDINARY MAINTENANCE
Most parts of the stove are easy to remove with
a simple screwdriver, eventual repairs or modifies
will be faster if the concerned piece, directly or by
a dealer is sent to our factory. The components in
touch with the flame, as the vermiculite covering
and the grill, sometimes must be replaced. The
lifespan of these components depends on how
Moreover, the glass can be cleaned with normal
products available in commerce. It is recommend-
ed to use a soft rag wet, drying accurately after the
operation is done.
should be not enough, check the inclination of the
stove, operating on the levelling pins when nec-
essary.
and breakings may occur. For this reason, the
spaces that allow the dilatation both internal and
external of the stove must be kept free and clean.
much and how the stove is used. If you need ac-
cessories or spare parts, please tell us the serial
number of the stove indicated in the green booklet
given together with the stove.
The serial number is indicated also on the plate
placed on the internal side of the wood vain.
89