AMATECH F-70100 Instructions D'utilisation page 23

INSTRUCTIONS FOR USE
Flexing and Tilting the Spine System
 Use OR table controls to flex or tilt the Spine
System.
 When making adjustments unlock base
joint.
Always monitor base during adjustments,
and insure base is always flush to the floor
during articulation.
Never flex and tilt Spine System at the
same time. Doing so may cause the base
to lift off the ground.
Never use preset surgical table motions
with Spine System attached. Pressing the
"Home" button on the surgical table when
attached to the seat section will likely
cause harm to the patient and damage to
the table.
Document Number: 80028211
Version: A
Page 23
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E