Cleaning And Maintenance Instruction - AMATECH F-70100 Instructions D'utilisation

INSTRUCTIONS FOR USE

Cleaning and Maintenance Instruction:

The resistance on the Tilt Pin is set at the factory, however it can be adjusted by
the user if desired.
To adjust the resistance:
1. Pull down on the handle
and rotate away from leg.
2. Turn handle clockwise to
increase the resistance,
OR
Turn handle
counterclockwise to
decrease the resistance.
3. After adjusting, pull down on
handle and rotate until
handle touches leg.
Cleaning
WARNING:
 Do not use bleach or products that contain bleach to clean the device. Injury or
equipment damage can occur.
 After each use, clean the device with alcohol-based wipes.
 Do not put the device into water. Equipment damage can occur.
 Use a cloth and a quaternary ammonium disinfecting/cleaning solution to clean
and disinfect the device.
Document Number: 80028211
Version: A
Page 31
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E