AMATECH F-70100 Instructions D'utilisation page 18

INSTRUCTIONS FOR USE
11. Push End Caps flush to OR table
clamps. Insure Flex Frame is
centered on OR table.
Verify there is a 1" (25 mm) minimum gap
between the OR table and Spine System.
12. Tighten handles on underside of
frame.
a. Tighten one handle.
b. Verify End Caps are flush and
tighten second side.
Document Number: 80028211
Version: A
Page 18
1" Min Gap
(25 mm)
OR Table
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E