Lattice Barrier Pole; Technical Support; Spare Parts; Test Certificate And Handover - Chamberlain LiftMaster BARS1 Mode D'emploi

14.4

Lattice barrier pole

In preparation.
Information available on request.
14.5

Technical support

For technical support contact the installer of the unit. You may also contact us in case of technical
questions. Please have model identification (on the inside of door), unit diagram and unit's
documentation ready.
Chamberlain GmbH
www.chamberlain.de
email: info@liftmaster.de
14.6

Spare parts

We are happy to send you an up-to-date list of spare parts on request. Please contact the installer
of the unit or our customer service department. Only use original parts from our Chamberlain
product range. Usage of non-original parts is not permitted.
15

Test certificate and handover

• Draw up an inspection record for the operator of the unit
• The inspection record must contain all relevant information about the unit itself as well as the
special requirements of the unit
• All persons are to be listed (with name and corresponding function) who have been instructed in
the use and operation of the unit
• Give a detailed explanation of what to do in case servicing is needed: power failure, damage to
barrier pole, etc.
• All outstanding work still to be executed, which has an influence on the function of the unit,
needs to be listed. After completion a further inspection is required.
• If the unit is not safe to use, prohibit usage
• Document ALL inspections /check-ups that have been done
• Denote the expected dates of maintenance
• Draw up a diagram of the unit or take pictures as a means of documentation. If changes are
made by the operator, they can be proven in this way. The same goes for damages.
• Give the operator of the unit a copy of this installation and operation guide.
041BARMAN 03/2009
D e c l a r a t i o n o f C o n f o r m i t y
Automatic Barriers Models BARS1, BARS2, BARM6, BARL6 are in conformity to the
applicable sections of Standards EN60555, EN60335-1 • EN60335-1: 2002 • EN60335-2-
103: 2003 • EN55014-1: 2000 + A1 + A2 • EN55014-2: 2001 • EN61000-3-2: 2000 •
EN61000-3-3: 1995 + A1 • EN13241-1
per the provisions & all amendments
of the EU Directives .............................................2006/95/EC, 2004/108/EC, 1999/5/EG
D e c l a r a t i o n o f I n c o r p o r a t i o n
Automatic Barriers , when installed and maintained according to all the Manufacturer's
instructions meets the provisions of EU Directive 98/37/EG and all amendments.
I, the undersigned, hereby declare that the equipment
specified above and any accessory listed in the manual
Harry Naumann
Manager, Regulatory Affairs
Chamberlain GmbH
D-66793 Saarwellingen
March, 2009
conforms to the above Directives and Standard
40/40
s.
Notes