Chamberlain LiftMaster BARS1 Mode D'emploi page 42

IMPORTANT FITTING AND OPERATING INSTRUCTIONS
PLEASE START BY READING THESE IMPORTANT SAFETY RULES • SAVE THESE INSTRUCTIONS
This safety alert symbol means "Caution" - failure to comply with such an instruction involves risk of per-
sonal injury or damage to property. Please read these warnings carefully.
This barrier is designed and tested to offer appropriately safe service provided it is installed and operated
in strict accordance with the following safety rules.
Incorrect installation and/or failure to comply with the following instructions may result in serious personal
injury or property damage.
At least one Warning Sign for every traffic
direction is to be put up in the barrier
environment.
Installation and wiring must be in compliance
with your local building and electrical installa-
tion codes. Power cables must only be con-
nected to a properly earthed supply.
Any entrapment possibility by the moving wing
between wing & walls must be secured with
safety edges or IR-sensors.
After the installation a final test of the full func-
tion of the system and the full function of the
safety devices must be done.
Pedestrians must not pass the barrier and
must have save access next to the barrier.
WARNING / ATTENTION
2/40
Some installation steps require a second
person.
Disconnect electric power to the system
before making repairs or removing cov-
ers.
A disconnecting device must be provid-
ed in the permanently-wired installation
to guarantee all-pole disconnection by
means of a switch (at least 3mm contact
gap) or by a separate fuse.
Make sure that people who install, main-
tain or operate
the barrier and/or the control board are
qualified and follow these instructions.
Keep these instructions in a safe place
so that you can refer to them quickly
when you need to.
The full protection against potential
squeeze or entrapment must work direct
when the drive arms are installed.
Notes