Mounting The Electronic Module To The Sensor Holder Of The 8202 (Without Fluid) - Burkert ELEMENT 8202 Mode D'emploi

Fig. 9: Mounting the probe into the holder of the 8202 (without
fluid)
7.4. mounting the electronic module
to the sensor holder of the 8202
(without fluid)
→
Check that the pH or redox probe is mounted into the sensor
holder.
18
→
Tighten the probe head using
a suitable wrench.
English
Type 8202/8222
Assembly
→
Check that seal "A" on the
holder is in good condition.
Replace it if necessary.
→
Clean connectors "B" and "C"
for connection of the pH/redox
probe with alcohol to avoid
measurement errors.
→
Insert the electronic module
into the holder, making sure
the polarising slots are correctly
positioned.
→
Apply slight vertical pressure to
engage the seal.
C
B
A