Assembly; Unscrewing The Cover; Mounting The Display Module - Burkert 8228 Mode D'emploi

7.2

unscrewing the cover

nOTe
the tightness of the device is not guaranteed when the cover
is removed.
▶ Prevent the projection of liquid inside the housing.
the device may be damaged if a metal component comes
into contact with the electronics.
▶ Prevent contact of the electronics with a metal component
(screwdriver, for example).
Fig. 4: Unscrewing the cover
Type 8228

Assembly

→
To unscrew the cover,
use your hand or a tool
which can be used as
a lever, taking care not
to scratch the glass.
→
Turn the cover until
fully unscrewed.
7.3

mounting the display module

20°
a)
b)
Fig. 5: Mounting the display module
English
→
Unscrew the cover (see
chap. 7.2).
→
Set the display module
at an angle of ca. 20° in
relation to the desired
position.
→
The display module can
be fitted in 4 different
positions, at 90° intervals.
c)
d)
→
Fully push in the display
module and turn to the
right to lock it.
13