Burkert ELEMENT 8202 Mode D'emploi page 14

Ph/redox-mètre ou conductivimètre
Masquer les pouces Voir aussi pour ELEMENT 8202:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.3.3.
electrical data
power supply
• Version with 3 outputs
• Version with 4 outputs
Characteristics of the
power source (not sup-
plied) of the UL versions
current consumption
• Version with 3 outputs
• Version with 4 outputs
Current consumption, with
loads on the transistors
Power consumption
Protection against polarity
reversal
Protection against voltage
spikes
Protection against short
circuits
14
• 14-36 V DC, filtered and regulated
• 12-36 V DC, filtered and regulated
• limited energy source (in
accordance to UL 61010-1,
paragraph 9.3)
• or Class 2 source (in accordance
to standards 1310/1585 and
60950-1)
• 25 mA max. (at 14 V DC)
• 5 mA max. (at 12 V DC)
1 A max.
40 W max.
yes
yes
yes, transistor outputs
English
Type 8202/8222
Technicaldata
Transistor output
NPN (/sink) or PNP (/source)
(depending on software setting),
open collector, 700 mA max., 0.5 A
max. per transistor if both transistor
outputs are wired.
NPN output: 0.2-36 V DC
PNP output: supply voltage
Current output
4-20 mA, sink ("NPN sink") or source
("PNP source") (depending on
software setting)
• Response time (10 % -
• 150 ms (default value)
90 %)
• max. loop impedance: 1100 W
• Version with 1 current
output
• max. loop impedance: 1100 W
• Version with 2 current
outputs
at 36 V DC, 610 W at 24 V DC,
180 W at 14 V DC
at 36 V DC, 610 W at 24 V DC,
100 W at 12 V DC

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Element 8222

Table des Matières