Instructions For Package And Storing - Tecno-gaz ANDROMEDA VACUUM xp 20 Mode D'emploi

PAR. 0
PAR
0 Index
1 Instructions for package and storing
2 Technical features
3 Supplied accessories
4 Pushbuttons and display on the control panel
5 Replacing the printer roll
6 Installation
7 Introduction for sterilisation
8 Sterilisation table
9 Filling of the water tank
10 Manual filling of the water tank
11 Emptying the tank
12 Commissioning and preparing the sterilisation
13 Night cycle
14 Maintenance
14.1 Daily routine maintenance - 14.2 Weekly routine maintenance
14.3 Quaterly maintenance
15 Setting the date and time
16 Messages of the alarm and error displays
TECNO-GAZ RESERVE THE RIGHT TO CARRY OUT IMPROVING TECHNICAL CHANGES WITHOUT
ANY PREVIOUS NOTICE. THIS MANUAL IS A SOLE PROPERTY OF TECNO-GAZ AND CANNOT BE
COPIED, REPRODUCED OR TRANSFERRED TO THIRD PARTIES WITHOUT THE WRITTEN
AUTHORISATION OF TECNO-GAZ.
PAR. 1
The autoclave is packaged in the following way:
It is wrapped in a POLYETHYLENE bag with polystyrene protections and contained in a corrugated board
box whose base has two wooden strips.
The package is not sterile. The package and the autoclave are fragile, therefore handle with care, transport
without shakes and hits and do not turn upside down. Do not lift the autoclave with sudden strokes; the
package handles are used only for the vertical lifting. Preserve in dry and protected areas at a
temperature (+5;+40)°C. Stocking 3 packaged autoclaves (same model) is allowed.
PACKAGE OVERALL DIMENSIONS: (600X600X830) mm
BOARD MATERIAL: BIWALL, 3 CORRUGATIONS
PACKAGE MATERIAL: FOAMED POLYSTYRENE
BAG MATERIAL: POLYETHYLENE
WEIGHT OF THE PACKAGED MACHINE: 50 Kg
THEME
ISTRUCTIONS FOR PACKAGE AND STORING
INDEX
THE PACKAGE MUST BE PRESERVED
DURING
PERIOD; TECNO-GAZ DOES NOT ACCEPT
RETURNS WITHOUT ORIGINAL PACKAGE.
15
THE WHOLE GUARANTEE
DNVT008 Rev_5
PAGE
15
15
16
17
17
17
18-19
20
20-21
21-22
22
22
22-23
24
24-25
25
26