Instructions For Autoclave Shipping - Tecno-gaz Europa B evo Mode D'emploi

16
In case the autoclave must be shipped for repairs, controls, reactivation, revisions,
validations follow the obligatory indications below:
1. Use the original packaging; if this is no longer in your possession, use adequate
packaging. The merchandise travels at risk to the sender.
2. Ship only the autoclave, always removing trays and tray carrier.
3. Carefully clean the sterilization chamber and autoclave in general before shipping. In
case it arrives dirty or with residual the autoclave with be returned without being
repaired, or it will be put through a cleansing action and disinfection.
4. Always empty the clean water tank through the attachment located on the back of the
autoclave (PICT.2 pos..2.)
5. Always empty the used water tank through the attachment located on the back of the
autoclave (PICT.2 pos..5.)
6. Indicate by letter and insert in the package a document which indicates precisely the
irregularity or service desired.
7. Ship at your expense, otherwise you will be billed for shipping.
ATTENTION
All non original packaging which arrives will be disposed of.
Autoclave will be returned with new and original packing to insure maximum
protection for your autoclave during shipping.
Cost of packaging will be charged to client.
INSTRUCTION FOR AUTOCLAVE SHIPPING
ENGLISH
41