General Information; Manufacturer's Address And International Contacts; Warranty Conditions; Information On The Internet - Burkert 8228 Mode D'emploi

Generalinformation
4

GenerAl informATion

4.1 manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at:
www.burkert.com
4.2

Warranty conditions

The condition governing the legal warranty is the conforming use of
the device in observance of the operating conditions specified in this
manual.
4.3

information on the internet

You can find the user manuals and technical data sheets regarding
the type 8228 at:
www.burkert.com
Type 8228
5 unDersTAnDinG The nAme
plATe
1 2 3
8228 Inductive Conductivity Meter
Supply: 12-36V 40W max.
Output: 1x4-20mA 1xTrans 700mA max.
17
Cell: PEEK Range 100 µS/cm - 2 S/cm
16
Process: Temp -15 to 130°C
15
PN 10, limited by fitting material and fluid temp.
14
13
IP65-IP67 W41MN
12
11
S-N:1000
00566615
10 9
Fig. 1: Name plate of the device (example)
1. Supply voltage
2. Type of the device
3. Measurable variable
4. Max. power consumption
5. Max. current available at the transistor output(s)
6. Conductivity measuring range
7. Fluid temperature range
8. Pin assignment of the M12 fixed connector(s)
9. Conformity logos
English
4
5
6
7
2:NPN/PNP1
8
3:0V 1:V+
4:I1
7