Monitoring The Value Of The Daily Totalizer; Details Of The Information Menu - Burkert 8025 Manuel D'utilisation

8.8.3 monitoring the value of the daily
totalizer
The parameter "VOLUME-W." makes it possible to monitor the
value of the daily totalizer. When the set value is reached, a warning
message is generated by the device.
To deactivate the monitoring of the totalizer, set "VOLUME-
W." to zero.
WARNiNG VOLUME-W.
END REtURN
Fig. 25 : Diagram of the "VOLUME-W." parameter of the Test menu
When the warning message "WARN. VOL." is sent out (see chap.
9.4.3), reset the totalizer: see chap. 8.7.6.
33
= 0000000
→
Enter the volume of the daily
totalizer for which a warning
message is generated by the
device.
→
Confirm.
English
Type 8025 / SE35, battery powered
Adjustment,Commissioning
8.9

Details of the information menu

For the meaning of a message, go to chap. 9.4.2 and 9.4.3.
To access the Information menu, press the
in the Process level.
In this menu read the charge of the batteries and the error or
warning messages generated by the device.
See chap. 8.9.1
BAtt.
MESSAGE 1
0......9
MESSAGE 2
MESSAGE N
0......9
ENTER
END
Fig. 26 : Diagram of the Information menu
key for at least 2 s,
Process level