Default Settings Of The Device; Operating Levels Of The Device - Burkert 8025 Manuel D'utilisation

you want to...
activate the automatic
scrolling of the values dis-
played in the Process level
modify a numerical value.
8.4

Default settings of the device

Function
LANGUAGE
UNIT of the flow rate
UNIT of the totalizers
Number of decimals
K FACTOR
FILTER
WARNING-FLOW
WARNING-VOLUME
18
press...
for 2 s, in the Process level.
0......9
→
To stop the automatic scrolling,
press any key.
• to increase the blinking digit.
0......9
• to select the digit at the left of
the blinking digit.
• + to move the decimal
0......9
point.
Default value
English
l/min
litre
Auto
1
Filter 2
W- = W+ = 0.000
000000
English
Type 8025 / SE35, battery powered
Adjustment,Commissioning
8.5

operating levels of the device

The device has two operating levels: the Process level and the Con-
figuration level.
The Process level makes it possible:
• to read the flow rate measured by the device and the value of the
totalizers, the main and the daily ones.
• to reset the daily totalizer.
• to access the Configuration level.
The Configuration level makes it possible:
• to set the device parameters.
• to read the rotational frequency of the paddle wheel.
• to read the charge of the batteries.
• to read the error or warning messages generated by the device.