Burkert 8025 Manuel D'utilisation page 34

WARNiNG
Fig. 24 : Diagram of the "FLOW-W." parameter of the Test menu
32
FLOW-W. W-= 0.000
→
Enter a flow rate value (in the units chosen in the "UNIT" parameter), below
which a "WARN LO" warning message is generated by the device.
→
Confirm.
W+= 0.000
→
Enter a flow rate value (in the units chosen in the "UNIT" parameter) such
as W+ > W-, above which a "WARN HI" warning message is generated by
the device.
→
Confirm.
DEL.= 00
→
Enter the value of the time delay (value between 0 and 99 s) one or the
other threshold can be exceeded before a warning message is generated
by the device.
→
Confirm.
VOLUME-W.
English
Type 8025 / SE35, battery powered
Adjustment,Commissioning