Sport-thieme ST 310 Mode D'emploi page 42

Assembly
38
59
36
(a)
Step-4
Handlebars and computer
Insert the pulse cable into the handlebar post (29) through the hole, and then pull the pulse cable
out of the handlebar post like fig. (a).
Connect the pulse cable and the upper computer cable (64) with the computer (38). And then fix
the computer (38) on the handlebar post (29) by using the screws (59) that have already attached
with the computer.
Assemble the handlebars (36) on the handlebar post (29) by using the cover (42), bushing (45),
the spring washer (44), the flat washer (43) and the T-type knob (37).
You may adjust the angular to your individual convenience before fixing the handlebars (6) tightly.
82
(b)
38
64
30
42
45
44
43
37
42
(x4)
M5*10L
(c)
78