Assembly - Sport-thieme ST 310 Mode D'emploi

Assembly

Assembly:
For the assembly of this item we recommend to use the provided tools. Before starting to assemble
please check according to the part-list in this manual, if all parts are complete. Perhaps some
parts are already pre-assembled for your convenience.
For your safety in some cases lock nuts were used. Maybe it is a little difficult to screw them
tightly onto the respective screws, but they will not get loose easily (to ensure a safe connection).
If you should loose and fix those lock nuts several times, they will lose this lock mechanism.
In this case you should use new lock nuts of same size.
A
(x4)
M8*95L
1
13
7
4
Step-1
Stabilizers
Attach the front stabilizer (4) & rear stabilizer (2) to the main frame (1) with 2 bolts M8x95 (7), 2
curved washers (13), 2 spring washers (12) and 2 nuts (6).
The rear stabilizer is equipped with adjustable caps (3) for compensation of uneven floor if
necessary. Adjust these end caps until the exercise bike is standing firmly on the floor.
The front stabilizer (4) is equipped with transportation rolls, which allow you to move the item easily
from one place to another after assembling (please pay attention to protect your floor against
scratches and/or abrasion before any transport action).
Properly fix the stabilizers in order to avoid loosing them during exercise.
D22 D22
13 12 6
39
M8*15L
D15.4
6
12
2