TURKISH
POLISH
PORTUGUESE
CZECH
HUNGARIAN
CROATIAN
90
GREEK
WiFi
settings
Ethernet
settings
Add users
Edit users
Delete users
Admin user
Generic user
Alphanumeric
keypad
USB
Print
Barcode
Report
Label
Increase
Decrease
52
STOP water
Info
Sets the language for all menus to TURKISH
Sets the language for all menus to POLISH
Sets the language for all menus to PORTUGUESE
Sets the language for all menus to CZECH
Sets the language for all menus to HUNGARIAN
Sets the language for all menus to CROATIAN
Sets the language for all menus to GREEK
Goes to the wireless settings screen, where you can select
which network to connect to and enter the corresponding
password
Goes to the Ethernet settings screen, where you can set the
network parameters (IP address, subnet mask, gateway)
Goes to the user data entry screen (name, surname, PIN).
After you have selected which user to edit, it goes to the user
edit screen (name, surname, PIN)
After you have selected which user to delete, it asks for
confirmation
Goes to the Admin data (name, surname, PIN)
From the edit section, it goes to the user data (name, surname,
PIN)
From the delete section, it determines which user is to be
deleted
Allows you to enter letters, numbers and symbols.
E.g. To select the letter C, press the corresponding key 4 times
(2, A, B, C)
Goes to the screen where you can load cycles onto a USB pen
drive
After inserting the USB drive, you can select the cycles that
you want to transfer.
Goes to the screen where you can print reports, labels and
barcodes
The icon will be disabled if the printer is not connected
Goes to the screen with the machine manufacturing
information:
SN, PN, installation date, configuration, FW, no. of cycles,
website
Selects barcode printing.
Once selected, a menu appears from which you can choose the
number of labels to print.
Printing starts when you confirm.
Selects and activates cycle report printing
Selects label printing.
Once selected, a menu appears from which you can choose the
number of labels to print.
Printing starts when you confirm.
Increases the value in the relative field by ten
Decreases the value in the relative field by ten
Stops the manual water filling pump