Faro NISEA Basic Mode D'emploi page 52

134°C Helix Test
Previous
134°C
Bowie & Dick
Vacuum Test
Test
121°C Helix Test 134°C Helix Test
134°C
Vacuum Test +
Bowie & Dick
Helix Test
Test
Vacuum Test +
Bowie & Dick
121°C Helix Test
Test
Vacuum Test +
Programmed start
Helix Test
Vacuum Test +
Bowie & Dick Next
Test
Previous
Programmed start
Next
User settings
Previous
Settings screen
Date/time settings
User settings
Language settings
Date/time settings
Measurement unit
settings
Connectivity
settings
Water parameter
settings
Printer settings
Service
Next
Previous
ENGLISH
ITALIAN
FRENCH
GERMAN
SPANISH
TURKISH
POLISH
PORTUGUESE
cycle specifications
previous option
Goes to the 134°C
Goes to the Vacuum Test screen, which displays all of the
Bowie & Dick Test screen, which displays all of the cycle
cycle specifications
specifications
Goes to the 121°C Helix Test screen, which displays all of the Goes to the 134°C Helix Test screen, which displays all of the
cycle specifications cycle specifications
Goes to the 134°C
Goes to the Vacuum Test + Helix Test screen, which displays
Bowie & Dick Test screen, which displays all of the cycle
all of the cycle specifications
specifications
Goes to the Vacuum Test + Bowie & Dick Test screen, which
Goes to the 121°C Helix Test screen, which displays all of the
displays all of the cycle specifications
cycle specifications
Goes to the Vacuum Test + Helix Test screen, which displays
Programs the test start time.
all of the cycle specifications
Increases the value in the relative field by one unit or goes to Goes to the Vacuum Test + Bowie & Dick Test screen, which
the next option displays all of the cycle specifications
Decreases the value in the relative field by one unit or goes to
Programs the test start time.
the previous option
Goes to the user settings screen.
Increases the value in the relative field by one unit or goes to
the next option
You can choose from: add user, delete user, edit/change user.
This section can only be accessed by the administrator user
Decreases the value in the relative field by one unit or goes to
"Admin", who will be asked to enter a PIN
the previous option
Goes to the settings screen. Varies the display brightness and
Goes to the date/time settings screen. Sets the time (hours,
Goes to the user settings screen.
contrast (from 0 to 100)
minutes, 12/24) and date (dd/mm/yyyy)
You can choose from: add user, delete user, edit/change user.
Goes to the language settings screen. Selecting a different
This section can only be accessed by the administrator user
language automatically returns to the settings screen with all
"Admin", who will be asked to enter a PIN
the fields updated in the selected language
Goes to the date/time settings screen. Sets the time (hours,
minutes, 12/24) and date (dd/mm/yyyy)
Goes to the measurement unit settings screen. Changes the
pressure measurement unit
Goes to the connectivity settings screen.
You can choose WiFi or Ethernet
Goes to the water parameter settings screen.
Changes the water filling type (manual at the front or water
mains at the rear)
Displays the water quality. There are three levels: green,
yellow and red, with the cursor on the corresponding level
Goes to the printer settings screen. Sets manual or automatic
printing
Goes to the service section, after entering a PIN.
The service section has dedicated graphics to show users
where they are
Increase the value of the relevant field by one unit or move
to the next option
Decrease the value of the relevant field by one
to the previous option
Sets the language for all menus to ENGLISH
Sets the language for all menus to ITALIAN
Sets the language for all menus to FRENCH
Sets the language for all menus to GERMAN
Sets the language for all menus to SPANISH
Sets the language for all menus to TURKISH
Sets the language for all menus to POLISH
Sets the language for all menus to PORTUGUESE
unit or move
89 89
89 89
51 51