3/4" Overlay Panel Dimensions - Monogram ZIP360NN Instructions D'installation

Design Guide - Standard Installation
3/4" (1.91 cm) OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed on trimmed
models. The overlay panel must be secured to a 1/4
panel which slides into the trim. A spacer panel 0.10
be placed between the overlay and backer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel to the overlay
panel. Secure the overlay panel to the backer panel with glue and screws.
Screws must be countersunk into the backer panel.
Grille Back
C
A
Handle
Hinge
Side
Side
C
Fresh
Backer with
Food
Overlay Panel
Back
Assembly
D
B
A
Freezer Back
C
A
.25" + .10" + .75" = 1.10" Total Panel Thickness
(0.64 + 0.25 + 1.9 = 2.79 cm)
NOTE: Left-to-right offset is not always equal
to top-to-bottom offset.
31-1000451 Rev. 0
B
D
Hinge
Side
C
Fresh
Food
Back
D
B A
B
D
(0.64 cm) thick backer
"
(0.25 cm) thick must
"
Panel Locations
A
Door Panels 1/8"
(0.32 cm)
Drawer Panel 1/8"
(0.32 cm)
Grille Panel 1/8"
(0.32 cm)
Panel Dimensions
Fresh Food
1/4" (0.63 cm) 46-1/16" x 16-1/2"
(116.99 x 14.91 cm)
Backer Panel
0.10" (0.25 cm) 44-11/16" x 15"
(113.51 x 38.10 cm)
Spacer Panel
3/4" (1.9 cm) 46-5/16" x 16-5/8"
(117.63 x 42.23 cm)
Overlay Panel
9
B C D
0 1/8" 1/8"
(0.32 cm) (0.32 cm)
1/8" 1/16" 1/16"
(0.32 cm) (0.16 cm) (0.16 cm)
1/8" 1/16" 1/16"
(0.32 cm) (0.16 cm) (0.16 cm)
Freezer
33-7/8" x 21-7/8" 33-7/8" x 8-7/8"
(86.04 x 55.56 cm) (86.04 x 22.54 cm)
32-1/2" x 20-1/2" 32-1/2" x 7-5/8"
(82.55 x 52.07 cm) (82.55 x 19.37 cm)
34-1/8" x 22"
(96.67 x 22.86 cm)
(96.67 x 55.88 cm)
Overlay Panel
Spacer Panel
Backer Panel
IMPORTANT NOTE: Maximum
total weight for the assembled
panels:
• Fresh food door panels – 30 lbs.
(14 kg)
• Freezer drawer panel – 28 lbs.
(13 kg)
• Grille Panel – 11 lbs. (5 kg)
Grille
34-1/8" x 9"