General Description - GYS ENERGY STATION Notice Originale

Translation of the original instructions
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see
home page).
• Equipment in conformity with Moroccan standards. The dec-
laration C‫( م‬CMIM) of conformity is available on our website
(see cover page).
Disposal:
• This product should be disposed of at an appropriate recycling
facility. Do not dispose of in domestic waste.
• The battery must be removed from the device before the latter
is discarded.
• The device must absolutely be disconnected from the power
supply network before removing the battery.

GENERAL DESCRIPTION

Energy Station is an autonomous starter designed to start vehicles with a 12V or 24V battery. The trolley enables to
place 1 or 2 12V batteries (6 2V cells) for a capacity up to 180Ah each. The machine integrates 2 automatic batte-
ry chargers to charge the internal and external batteries and a battery tester. In starter mode, the electronic of the
vehicle is protected against overvoltage.
ASSEMBLY
Trolley
Fastenings : 4 screws, 8 M5x12 screws, 2 M6x50 screws, 30 M8x12 screws, 30 M8 nuts.
Tools necessary for the assembly (not provided): 1 set of Allen keys, 1 wrench of 10 and 8, 1 screwdriver with screw-
driver bit torx T20 (for the handle)
1
M8 x12
4
Vis
tôle
M6
x50
ENERGY STATION
2
M8 x12
M5
x12
Vis
tôle
3
5
EN
M5
x12
11