General Description - GYS FLASH 6.12 LITHIUM Mode D'emploi

• After charging, disconnect the charger from the mains, then
disconnect the negative clamp from the car body and then
disconnect the positive clamp from the battery, in this order.
Connection :
• Class II device
• The connection to the power supply must be carried out in
compliance with national standards.
Maintenance :
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales or by an equally qualified person
to prevent any accidents.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic
Community).
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see home
page).
• Equipment in conformity with Moroccan standards.
• The declaration C
our website (see cover page).
Waste management:
• This product should be disposed of at an appropriate
recycling facility. Do not throw away in a household bin.

GENERAL DESCRIPTION

The GYSFLASH 6.12 Lithium is designed to charge the Lithium batteries of type Lithium Fer Phosphate (LFP / LiFePO4).
This charger has been designed to charge 12V batteries (4 elements in series) from 1.2 Ah to 125 Ah, or for floating charge up to
170 Ah.
START UP
1. Connect the charger to the battery using the proper accessory (clamps, lugs, etc...).
2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz).
3. Select the mode by pressing the
4. During the charge, the device indicates the charge progress. When indicator
Once indicator stays on, the battery is fully charged.
5. The charge can be interrupted at any time by unplugging the mains plug or pressing the
6. After the charge, disconnect the charger from the mains, then disconnect the charger's connections from the battery.
GYSFLASH 6.12 LITHIUM
(CMIM) of conformity is available on
‫م‬
button. After roughly 5 seconds, the charge starts automatically.
blinks, the battery is ready to start the vehicle.
button.
EN
7