Power Switch - Johnson & Johnson DePuy Synthes FMS VUE II Manuel De L'opérateur

no. description
sOlO pad
13
Press to switch to SOLO mode .

pOwer switCh

14
Provides power to the pump .
fOOt pedal connection
15
Connection port for 5-Way Foot Pedal .
run/stOp pad
16
Starts and stops the pump
remOte hand COntrOl connection
17
Connection port for the remote hand control .
handpieCe interface connection
18 Connection port for handpiece or FMS CONNECT Interface Cable (Contact your
DePuy Synthes representative for availability) .
fill Chamber pad
19
Press to fill the Fill Chamber .
fill Chamber bracket
20
Supports Fill Chamber .
pressure sensOr QuiCk COnneCt port
21
Connects/disconnects the pressure sensor to the pump .
irrigatiOn auto-locking slot
22
Locks the tubing in place around the IRRIGATION roller pump .
lOw pressure alarm
23
Indicates low joint pressure .
high pressure alarm
24
Indicates high joint pressure .
blOOdstOp™ indicator
25
When illuminated, indicates pump is in BLOODSTOP mode .
17