Rear Rack Battery Packs - Trek Ride+ Manuel Du Propriétaire

I u
nstruCtIons for se

4.3 Rear rack battery packs

• Battery pack size
Depending on the model, your bike will be equipped with a 244 Wh to 408 Wh battery pack.
Removal, charging and putting back are the same for all battery packs.
• Bontrager Interchange System compatibility
The rear rack battery packs are compatible with the Bontrager Interchange System. This means you
can mount a(n optional) Bontrager Interchange basket or pannier on the rear rack of the bike by
removing the plug from the battery pack.
• Removing the battery pack from the bike
Insert the key into the lock on the battery docking and turn it clockwise (1,2). The battery pack can
now be taken off the bike. Slide the battery pack out by pulling it to the rear (3,4). Don't forget to
take the keys out of the lock after removal.
• Putting the battery pack onto the bike
Turn the key of the lock anti-clockwise and slide the battery pack into the rear rack, connector side
first (1). Make sure the battery pack engages the rail (2). Slide all the way forward, pushing through a
slightly higher resistance at the end as the connector engages (3). Take the key out (4).
Do not ride the bike with the lock open.
EN-21