Charging - Trek Ride+ Manuel Du Propriétaire

Vélo électrique
Masquer les pouces Voir aussi pour Ride+:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Q
uICk start

1.3 Charging

• Power supply
The charging process is the same for all battery pack types. They can be charged using the power
supply, on the bike or removed from the bike.
Rear rack type battery pack
NOTICE. When not in use, charge a battery pack at least once every six months (refer to paragraph
4.7 for detailed instructions).
• Charging the battery pack
1. Turn the system Off.
2. C onnect the connector of the power supply to the charging port of the battery pack and connect
the power supply to the power outlet.
WARNING. Replace a damaged power cable immediately to prevent an electric shock.
3. The battery pack will emit beeps and then the charging port will turn orange. When the battery
pack is full, the charging port will turn green. To stop charging, just disconnect both connectors.
The battery packs with the round charging connector can be left connected to the power
indefinitely. The power supply electronics will take care of the correct charging procedure.
However, you will save energy by disconnecting the power supply when the light in the charging
port has turned green.
EN-7
- C
hargIng
GREEN/ORANGE
Down tube type battery pack
GREEN/ORANGE

Publicité

Table des Matières
loading

Table des Matières