Trek Ride+ Manuel Du Propriétaire page 14

D
escription
• Controllers
1. B ionX G2 controller.
Controls all functions: On/Off, the four assist levels, the four regenerative
levels and lights On/Off. It also functions as a bicycle computer,
measuring speed and distance, and shows the battery charge level.
2. R IDE+ Pro controller.
Controls all functions: On/Off, the four assist levels, the four regenerative
levels and lights On/Off. It also functions as a bicycle computer, measuring
speed and distance, and shows the battery charge level. All the information
can be provided in different languages (see 'programming').
• Brake Switch
T he right-hand brake lever of cable-activated brakes contains a
switch that cuts off the power to the motor, and switches the motor
to generation mode as soon as the right-hand brake lever is pulled.
• Wiring Harness
The wiring harness links controller, brake switch, battery pack and motor. It runs through the frame
and is linked to the battery pack via the docking station in the rear rack or via the docking station
on the down tube.
EN-11