Structure; Technical Data; Conformity; Standards - Burkert 8681 Guide Rapide

5.2

Structure

Position measuring system with LED
(device status display (Top LED))
Electronic
module (with
service interface,
terminal strips, DIP,
Teach-In buttons)
Mechanical manual
override at the
SV (red lever)
Electrical
connections
(cable glands)
Lead seal lug
Shoulder screws (2 x M5) - no sealing function, merely
as protection against being pulled off the hub flange
Fig. 1: Structure
Type 8681

Technical data

Flow restriction
screws of the sole-
noid valves (SV)
s. "Fig. 3"; up to
3 SVs mounted
Locking
groove (3 x)
Pneumatic
connections
6 TECHNICAL DATA
6.1

Conformity

The control head Type 8681 conforms to EU Directives according
to the EU Declaration of Conformity.
6.2

Standards

The applied standards which are used to demonstrate compliance
with EU Directives are listed in the EU Prototype Examination Cer-
tificate and/or the EU Declaration of Conformity.
The specifications on the respective type label apply to the
respective control head. The symbols on the type label indicate
the applicable directives or approvals.
6.3

Type label (example)

In addition to the CE Mark for EU conformity, the type label also
shows symbols for approvals according to ATEX Directives, FM
(Factory Mutual) or UL (for Canada and USA - see also chapter
"6.9") if these apply to the respective device .
Further details can be found in the "Operating Instructions
Type 8681".
english
Device designation/Type
Device design, number of solenoid
valves
Permitted pressure range
Permitted temperature range
Serial number S/N
ID number / Production details
Barcode
CE
9