Operation; Switching On The Light; Switching On The Sauna Control Unit; Starting Sauna Mode - Quick-Start - Sentiotec K3 NEXT Instructions De Montage Et Mode D'emploi

Instructions for use for the user
9.

Operation

Refer to Fig. 6 on page 22.

9.1. Switching on the light

The light in the sauna cabin can be switched on and off regardless of which
position the ON/OFF switch 8 is in.
To switch the light on or off, press the light switch 7.

9.2. Switching on the sauna control unit

WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
Press the ON/OFF switch 8 to switch on the sauna control unit.
► The control lights 1 and 3 light up briefly.
► A beep can be heard.
► 00.00 flashes on the display 2.
► The sauna control unit is operational.
9.3. Starting sauna mode – Quick-start
1. Use the temperature selector 4 to set the preferred sauna temperature.
The further it is turned to the right, the higher the cabin temperature.
2. Briefly press the time button 9.
► The sauna heater is switched on and begins to heat up.
► The control light 3 lights up.
WORLD OF WELLNESS
p. 23/32
EN