Display Elements 24 V Dc; Description Of The Leds And Jumpers - Burkert 8695 Manuel D'utilisation

9.3. display elements 24 V dc
9.3.1. description of the leds and Jumpers
Status LED yellow
Figure 19: Description LED and Jumpers - 24 V DC
noTe!
damage or malfunction due to penetration of dirt and humidity!
• To observe protection class IP65 / IP67, screw the transparent cap in all the way.
status led yellow
led yellow
flashing Teach function is running
Puck PCB or puck holder not available
flickers
→
Table 3: Status LED yellow - 24 V DC
Valve led yellow
The yellow LED (valve) indicates whether the pilot valve is actuated (LED is lit yellow).
end position led green and yellow - device status
The following functions are shown as standard for the device status:
color
green LED on
yellow LED off
Table 4: Assignment of LEDs - 24 V DC
Jumper function:
You can set the colour assignment of the end positions with the jumpers.
You can indicate for each colour whether it applies to the Top (end position top) or Bot (end position bottom)
30
Insert puck PCB or puck holder
Device status
End postion bottom
End postion top
english
Type 8695
Electrical Installation 24 V DC
End position LED green
Jumper for
assignment of
end position LEDs
End position LED yellow
Valve LED yellow (pilot valve)