Track Tension Adjustment - Yamaha RS90K Manuel D'atelier

3
È

TRACK TENSION ADJUSTMENT

4
É
d. Check the track alignment with the slide runner
2. If the alignment is incorrect, turn the left and
right adjusters to adjust.
Track alignment
3 Left adjuster
4 Right adjuster
5 Slide runner
6 Track
7 Track metal
a Gap
Ê Forward
e. Adjust the track deflection until the specified
amount is obtained.
Track deflection
3 Left adjuster
4 Right adjuster
CAUTION:
The adjusters should be turned an equal
amount.
f. Recheck the alignment and deflection. If neces-
sary, repeat steps (c) to (e) until the specified
amount is obtained.
g. Tighten the rear axle nut.
Rear axle nut:
RS90/RS90R/RSG90/RS90M/
RST90:
75 Nm (7.5 m · kg, 54 ft · lb)
RST90TF:
80 Nm (8.0 m · kg, 58 ft · lb)
2-36
INSP
ADJ
È É
Shifted to Shifted to
right left
Turn out Turn in
Turn in Turn out
More than Less than
specified specified
Turn in Turn out
Turn in Turn out