Updating The Firmware; Disposal; Guarantee - DAB E.SYBOX MINI 3 Instructions Pour L'installation Et L'entretien

1. No water.
The display Red: on 2. Pump not primed.
shows White: on 3. Setpoint not reachable
BL Blue: off with the set RM value
The display Red: on
shows White: on 1. Faulty pressure sensor. 1. Contact the assistance centre.
BP1 Blue: off
The display Red: on
shows White: on
1. Faulty pressure sensor. 1. Contact the assistance centre.
BP2 Blue: off
The display Red: on 1. Excessive absorption.
shows White: on 2. Pump blocked.
OC Blue: off
The display Red: on 1. Supply voltage too low.
shows White: on 2. Excessive drop in
PB Blue: off voltage on the line.
1-2. Prime the pump and check whether
there is air in the pipe. Check whether the
suction or any filters are blocked.
3. Set a RM value that allows the setpoint
to be reached.
1. Fluid too dense. Do not use the pump
for fluids other than water.
2. Contact the assistance centre.
1. Check the presence of the correct
supply voltage.
2. Check the section of the power supply
cables.

11 - UPDATING THE FIRMWARE

Firmware version 3.xx can only be updated via App, for other versions the update can be
done via D-connect Box through wireless communication. For further information on the
latter type of update please refer to the D-Connect Box manual.

12 - DISPOSAL

This product or its parts must be disposed of in an environment-friendly manner and in
compliance with the local regulations concerning the environment; use public or private
local waste collection systems.

13 - GUARANTEE

Any use of faulty material or manufacturing defects of the appliance will be eliminated
during the guarantee period contemplated by the law in force in the country where the
product is purchased, by repair or replacement, as we decide.
The guarantee covers all substantial defects that can be assigned to manufacturing faults
or to the material used if the product has been used correctly, in accordance with the
instructions.
The guarantee is void in the following cases:
• attempts to repair the appliance,
• technical alterations to the appliance,
• use of non original spare parts,
• tampering.
• inappropriate use, for example industrial use.
Excluded from the guarantee:
• parts subject to rapid wear.
When making a request under guarantee, apply to an authorised technical assistance ser-
vice, presenting proof of purchase of the product.
GB
ENGLISH
68