Using The Impact Absorbing Tether - Britax GROW WITH YOU Guide D'utilisation

To remove the lower connector from the storage slot or
lower anchor:
1� Press and hold the red
2� Pull the lower connector

Using the Impact Absorbing Tether

Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points�
If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or
contact your vehicle man u fac tur er for assistance�
DO NOT modify your vehicle without advice from your
vehicle manufacturer�
HARNESS MODE: At all times use the top tether when
installing the child seat� Using the top tether will improve
the stability of your child seat and reduce the risk of
injury�
BOOSTER MODE: Do not tether without securing lower
connectors�
Tether anchor locations
vary from vehicle to vehicle�
Check your vehicle owner's
manual and look for the
tether anchor symbol
shown in the diagram to
help identify where the
top tether anchor point is
located in your vehicle�
To attach the tether to a
tether anchor:
1� Remove the webbing
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 27 12390000_USER GUIDE_GROW WITH YOU, CAN.indb 27
release button�
from the storage slot or
lower anchor�
from the elastic strap
and loosen the tether�
GROW WITH YOU User Guide
WARNING!
Or
Or
27
2/12/2020 6:22:53 PM 2/12/2020 6:22:53 PM