Installing The Child Seat; General Information - Britax GROW WITH YOU Guide D'utilisation

BRITAX Child Safety, Inc.

Installing the Child Seat

General Information

Harness Mode
•
•
•
•
•
•
8
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 8 12390000_USER GUIDE_GROW WITH YOU, CAN.indb 8
Install forward-facing only�
DO NOT use anything to raise the child seat off of the
vehicle seat�
DO NOT install with LUAS for a child weighing more
than 20�4 kg (45 lbs) in harness mode�
The top tether must be used at all times when
installing the child seat in harness mode� Using the
top tether will improve the stability of your child seat
and reduce the risk of injury�
Use this child seat in harness mode with children at
least 2 years of age and who weigh between 11�3 and
30 kg (25 and 65 lbs) and who stand between 85 and
125 cm (34 and 49 in�) in height� Britax recommends
using harness mode until your child outgrows its fit
requirements� See the Child Fit Information section on
page 7 for more information�
This seat may be used in
either the upright or recline
position in harness mode
(see illustrations at right)�
WARNING!
Upright Position
Recline Position
2/12/2020 6:19:30 PM 2/12/2020 6:19:30 PM