Britax Strollers; Using The Lower Universal Anchorage System (Luas) - Britax B-SAFE 35 Guide D'utilisation

BRITAX Child Safety, Ltd.
IMPORTANT: Do not force
the carry handle past the
upright carry position toward
the child's feet. Doing so may
cause damage to the carry
handle.

BRITAX Strollers

Attaching the Car Seat to the Stroller
1. Set the parking brake.
2. Align the stroller adapters
on the side of the infant
car seat with the recievers
on the BRITAX stroller and
push down until the car
seat locks into place.
3. Lift up on the infant car
seat to ensure that it is
secure.
34
Removing the Car Seat from the Stroller
1. Pull and hold the release
lever on the back of the car
seat and lift up to remove
from stroller.

Using the Lower Universal Anchorage System (LUAS)

The Lower Universal Anchorage System, or LUAS, is a
system available on this child seat that offers an alternative
to vehicle seat belt installation methods� The figure below
shows typical locations for lower anchors in a vehicle� See
pages 2-3 for LUAS components on this child seat�
Check your vehicle owner's manual to learn if it is equipped
with LUAS, the maximum weight rating for the lower
anchors, and information on the lower anchor locations and
designated seating positions available for use with this child
seat.
B-SAFE 35 User Guide
35