Switching Between Modes - Britax GROW WITH YOU Guide D'utilisation

Switching Between Modes

Harness to Booster Mode: Storing the Harness and Buckle
IMPORTANT:
to use this seat in booster mode� To store the harness,
follow the instructions below� If you wish to remove,
follow the instructions on page 32-33�
1� Loosen the harness
2� Open the chest clip�
3� Release the harness
4� Pull seat cover forward�
5� Unhook the elastic
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 29 12390000_USER GUIDE_GROW WITH YOU, CAN.indb 29
It is not necessary to remove the harness
completely�
a� Press release lever�
b� Pull both harness
straps forward�
a� Press tabs�
b� Pull apart�
buckle and place the
harness straps around
the armrests�
bands at the back of
the seat cover� Pull the
seat cover and foam
insert forward and slide
over the belly pad�
GROW WITH YOU User Guide
29
2/12/2020 6:23:15 PM 2/12/2020 6:23:15 PM