4� Place the child in the
5� Position the harness
6� Fasten the harness
7� Pull the harness adjuster
8� Fasten the chest clip
Before traveling, verify that the:
9 Harness straps are not twisted�
9 Harness is snug�
9 Buckle is fastened�
9 Chest clip is at the child's armpit level�
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 19
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 19
child seat� Ensure the
child is positioned
upright in the child seat
and not slouching� Their
bottom must touch the
child seat, and their back
must rest flat against the
back of the child seat�
straps around the child
(see page 22)�
buckle� Proper
connection is confirmed
with a click after inserting
each buckle tongue�
strap to tighten the
harness�
NOTE: The harness
should have a snug
fit around the child. A
snug strap should not
allow any slack. It lies
in a relatively straight
line without sagging. It
does not press on the
child's flesh or push
the child's body into an
unnatural position. You
should not be able to
pinch excess webbing.
and place the chest
pads in any position
that is comfortable for
the child within the
range of the correctly
placed chest clip�
NOTE: The correct height
for the chest clip is at the middle of the chest at armpit
level.
GROW WITH YOU User Guide
Pull the harness adjuster
away from the child seat
(parallel to the ground) to
tighten.
Do not pull sideways.
19
2/12/2020 6:21:22 PM
2/12/2020 6:21:22 PM