Using The Harness Buckle; Using The Chest Clip; Using The Recline - Britax GROW WITH YOU Guide D'utilisation

Using the Harness Buckle

To Fasten: Insert one tongue
at a time into the buckle�
NOTE: Proper connection
is confirmed with an
audible click after inserting
each buckle tongue.
To Release: Press the
release button and pull the
tongues from the buckle�
NOTE: Periodically clean
the buckle to ensure proper
operation. See page 43.

Using the Chest Clip

1� Open the chest clip�
2� Push together to fasten�

Using the Recline

IMPORTANT:
position in booster mode�
This seat may be used in either the upright or recline
position in harness mode�
1� Pull the recline adjustment
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 25 12390000_USER GUIDE_GROW WITH YOU, CAN.indb 25
a� Press tabs�
b� Pull apart�
NOTE: Always position
the chest clip at armpit
level.
This child seat must be used in the upright
handle and adjust the seat
to the desired position�
a� Ensure that the seat
is locked into the
desired position before
installing in the vehicle�
b� Ensure the top of the
child seat does not
rest against the top of the vehicle seat back while
reclining�
c� Pay attention while adjusting the recline to keep
hands clear of any pinch point�
GROW WITH YOU User Guide
25
2/12/2020 6:22:24 PM 2/12/2020 6:22:24 PM