BRITAX Child Safety, Inc.
Booster Mode
Only use a lap-shoulder belt to secure the child in
booster mode�
Use the shoulder belt guides on the child seat to ensure
proper fit�
Ensure the lap part of the vehicle belt sits low across the
child's upper thighs and that the shoulder part does not
contact the child's neck�
Before you begin:
•
•
1� Adjust the head restraint
2� Place the child in the
3� Route the shoulder
4� Adjust the head restraint
20
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 20
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 20
If your vehicle seat back is adjustable, ensure it is in
the upright position before placing the child seat on
the vehicle seat�
Adjust the child seat to the upright position and
place forward facing on the vehicle seat, if not
already installed (see page 8)�
to the highest position�
child seat�
NOTE: Ensure the child
is positioned upright in
the child seat and not
slouching. Their bottom must touch the child seat and
their back must rest flat against the back of the child seat.
part of the vehicle
belt through the red
shoulder belt guide and
fasten the vehicle belt
across the child�
so that the vehicle
shoulder belt lays straight
across the center of the
child's chest, above the
child's shoulder and does
not contact the child's
neck (A)� The lap part of
the vehicle belt is routed
low across the child's
upper thighs (B)�
NOTE: Ensure the head
restraint has locked into
position.
WARNING!
B
9
9
9
9
2/12/2020 6:21:26 PM
2/12/2020 6:21:26 PM