Securing Your Child; Harness Mode - Britax GROW WITH YOU Guide D'utilisation

BRITAX Child Safety, Inc.

Securing Your Child

Harness Mode

•
•
•
•
Before you begin:
Always check the seat area for debris and remove
it to prevent interference with the harness adjuster
mechanism�
1� Loosen the harness�
2� Open the chest clip�
3� Release the buckle and
18
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 18 12390000_USER GUIDE_GROW WITH YOU, CAN.indb 18
Never route the vehicle belt over the child when
using this child seat in harness mode�
Adjust the belts provided with this child seat so they
fit snugly around your child� A snug strap should
not allow any slack� It lies in a relatively straight line
without sagging� It does not press on the child's flesh
or push the child's body into an unnatural position�
Adjust the harness to fit the clothes the child is
wearing� Remove bulky coats and/or jackets before
putting the child in the child seat�
Verify that the child seat is secure and the harness
is properly adjusted around the child each time the
child seat is used�
a� Press the release
lever�
b� Pull both harness
straps forward�
a� Press tabs�
b� Pull apart�
place the harness straps
around the armrests�
WARNING!
2/12/2020 6:21:22 PM 2/12/2020 6:21:22 PM